NetCamCenter 3 User Guide


Configuring Web server and RTSP media server (*)




To configure Web server, click Setup on CamCenter, and then click the Server tab.

web server - NetCamCenter
  • Enable web server
    Enable web server allows you to monitor remotely and easy to search your video.

  • Port
    The default port used by NetCamCenter is 80. To change the port number enter desired port number and then click OK. If the port is used by other program, you will see the following message. To solve this problem, change the port number to a different port such as 90 or 8888.

    web server port number - NetCamCenter

    If you setup port other than 80, you will need to add port number to your web address. For example, if your IP address is 24.5.66.1, your web address is http://24.5.66.1:90

    The default port used by NetCamCenter is 80. You may choose other port, such as 90 or 8888 if the default is used by other software. If you setup port other than 80, you will need to add port number to your web address. For example, if your IP address is 24.5.66.1, your web address is http://24.5.66.1:90

  • Authorization required
    If you wish to control remote viewing, check the Authorization required box. Click User Manager to setup a user ID and password.

  • Enable RTSP server
    Enable RTSP server allows you to monitor with RTSP streaming and save bandwidth when viewing with mobile phone.

  • RTSP port
    The port numbers for RTSP server.

Click here for the instructions of setting up Windows firewall

* This feature is not available on CamNebula Free Edition. For remote viewing with CamNebula, please see CamNebula Help




All rights reserved.