NetCamCenter 3 User Guide


Finding your Internet IP Address




Before you start NetCamCenter for remote surveillance, you may need to configure firewall or router.

To find out NetCamCenter's IP address, you can click here to see your Internet IP address. Or follow the steps below to find your Internet IP address.

go to Start -> Programs -> Accessories -> Command Prompt or MS-DOS

Enter ipconfig and you'll see your current IP address.



To access NetCamCenter, start IE and then type in http://your IP address in the location bar.

If your PC is behind a router, logon to the router to find out your external IP address.

  • Start IE.
  • Enter the router's IP address. (Please refer to the user manual of your router. Below is a sample screen shot of router's setting.)

Internet IP address - NetCamCenter


(IP address such as 192.168.x.x, 127.0.0.1, 10.0.0.x, 4.0.1.0 is not accessible from Internet. If your IP address is 192.168.x.x or 10.0.0.x, please configure your firewall or router. Please refer to the router's user manuals to check if they support Port Forwarding or Virtual server. Otherwise, you may not be able to access NetCamCenter from Internet. )



All rights reserved.